• KS29-01-02: OO Gauge Shed with windows scale 12ft x 8 ft

The item is made out of 2mm MDF and should be painted on completion.

Item can be used either as a Beach Hut or as a Shed in a garden or allotment.



As this is a laser kit, the edges will look burnt but will not detract from the finish. Use sanding paper to clean up the edges to remove any blemishes.

Glue the sides to the inside of the back wall.

Glue the front wall to the front of the sides.

Make sure the whole structure is square.

The door is held on by a very thin piece of MDF and can be left off, glued in place closed or open as required. Use a scalpel if the door is to be removed, and carefully cut out from the surrounding area.

For a precision fit roof, lightly sand the side walls to the same angle as the sloping roof walls. Also sand the roofs where they meet to reduce the gap in the centre. Any further gaps can be filled in with light paste.

Glue the roof in place having a uniform overhang over the sides.

Paint and customise as required.

Write a review

Please login or register to review

KS29-01-02: OO Gauge Shed with windows scale 12ft x 8 ft

  • Brand: KS Laser Designs
  • Product Code: KS29-01-02
  • Availability: 2
  • Size (L x W x H) mm 54 x 35 x 34
  • £4.40

Tags: garden shed